一般來說，釀酒設備的各配套設備包含電機、電動執行器、儀器、外表等配件，它們的質量好壞也直接影響著設備功能的發揮，因而關于釀酒作坊來說，定時對其進行查看維修是很重要的，那關于咱們來說，應該怎樣保養保護它們呢？
Generally speaking, the supporting equipment of brewing equipment includes motor, electric actuator, instrument, appearance and other accessories. Their quality also directly affects the function of the equipment. Therefore, it is very important for Breweries to check and repair them regularly. How should we maintain and protect them?
①機殼維修：除定時查看機殼與進氣室內部是否有嚴峻的磨損，嚴峻的粉塵堆積之外，這些部位可不進行其他特別的維修。定時查看所有的緊固螺栓是否緊固，對有壓緊螺栓部的風機，將底腳上的蝶形彈簧壓緊到圖紙所規定的裝置高度。
Maintenance of chassis: In addition to checking regularly whether there is severe wear and tear in the chassis and intake chamber and removing severe dust accumulation, these parts can not be maintained in other special ways. Check regularly whether all fastening bolts are tightened. For fans with tightening bolts, the butterfly spring on the sole is tightened to the device height specified in the drawings.
②風機保護：運用環境應常常堅持整潔，風機外表堅持清潔，進、出風口不應有雜物。定時風機及管內的灰塵等雜物。只能在風機徹底正檔情況下方可工作，同時要堅持供電設備容量足夠，電壓安穩，嚴禁缺相運行，供電線路需要為專用線路，不應長時間用臨時線路供電。
(2) Fan protection: the use of the environment should always adhere to cleanliness, the appearance of the fan should adhere to cleanliness, and there should be no debris in the intake and outlet. Regular elimination of dust and other impurities in the fan and pipe. Only when the fan is in full positive gear can it work. At the same time, we should insist that the capacity of power supply equipment is sufficient, voltage is stable, and phase-absent operation is strictly prohibited. Power supply lines need to be dedicated lines, and temporary lines should not be used for a long time.
③及時更換光滑脂：應根據運用環境條件不定時對軸承彌補或更換光滑油脂，為保證風機在運行過程中的杰出的光滑，加油次數不少于1000小時/次，封閉軸承和電機軸承，加油用ZL–3鋰基光滑油脂填充軸承內外圈的2/3。嚴禁缺油工作。
(3) Replacement of smooth grease in time: The bearing should be repaired or replaced regularly according to the use of environmental conditions. In order to ensure the excellent smoothness of the fan in operation, refueling times should not be less than 1000 hours per time, sealing bearings and motor bearings, and refueling with ZL-3 lithium-based smooth grease to fill 2/3 of the inner and outer rings of the bearing. Oil shortage is strictly prohibited.
此外，釀酒設備的配套設備在閑置時，應儲存在枯燥的環境中，防止電機受潮。在露天存放時，應有防雨辦法。在儲存與轉移過程中應防止配件磕碰，以免設備受到損傷。
In addition, when the auxiliary equipment of brewing equipment is idle, it should be stored in a dry environment to prevent the motor from dampness. Storage in the open air should be rainproof. In the process of storage and transfer, parts should be prevented from bumping, so as to avoid damage to equipment.
The above information is our vending machine to organize and publish the hope to help you with our website is: http://gzxiangge.com/!
自動售酒機 2024-07-25 
